Description
Camera trap + 4 AA batteries + 1 32 GB memory card Num'axes
PIE1060 ALL INCLUSIVE PACK 1 PIE1060 camera trap + 4 AA batteries + 1 32 GB memory card
The PIE1060 camera trap offers you :
- virtually unlimited outdoor autonomy thanks to the built-in high-performance solar panel
- the ability to make adjustments and download photos and videos remotely thanks to the Wi-Fi function
Features of the PIE1060 Wi-Fi camera trap
- The Wi-Fi function allows you to remotely view, download or delete photos and videos using the free app (Android/iOS):
- view, download or delete recorded photos and videos
- take photos or videos
- modify product settings
- check power level and remaining memory capacity
- The device creates its own Wi-Fi network.
- The Wi-Fi function is activated via Bluetooth from a smartphone.
- Solar panel with built-in rechargeable lithium battery :
- 3.7 V - 4400 mAh
- The solar panel battery can be recharged using solar power or the USB cable supplied.
- The camera uses solar panel power first, before using battery power (if installed).
- Champ from vision: 80°.
- PIR sensor (motion/heat detector) :
- Detection angle: 60
- Detection distance: approx. 23 m
- Adjustable detection sensitivity: High | Medium | Low
- Flash Infrared :
- 36 invisible LEDs | Wavelength: 940 nm
- flash range: approx. 30 m
- Flash brightness-dependent infrared with automatic activation
- Infrared power flash adjustable: Auto | Medium | Low | OFF
- Trigger speed ultra rapide: approx. 0.3 seconds
- Capture modes :
- Photo: from 1 to 10 photos per trigger
- Video: programmable duration from 5 seconds to 3 minutes
- Photo + Video: a photo and then a video are taken each time the shutter is released
- Image sensor: 5 Mega Pixels color CMOS
- Photo resolution: 2 MP / 4 MP / 8 MP / 12 MP / 16 MP / 20 MP / 24 MP / 30 MP
- Programmable shutter speed: 1/15 | 1/20 | 1/30
- Photo file format: JPEG
- Video resolution: 368p / 480p / HD 720p / Full HD 1080p / Full HD 1296p / 2K
- Frames per second: 30 fps
- Audio recording in videos programmable (ON | OFF)
- Video file format : MPEG-4
- PIR detection mode: the camera takes photos and/or videos when the PIR sensor (motion/heat detector) detects activity in the area it covers
- Time Lapse mode: photos and/or videos are taken automatically at regular time intervals. In this mode, the PIR sensor is deactivated (no motion/heat detection).
- User-programmable operating ranges
- Photo/video timestamp: date, time, ambient temperature, moon phase, solar panel energy level, camera name
- Memory: max. 256 GB micro SD card, U1 class 10 minimum
- Low-energy night capture: 2 possible settings
- No flash infrared: at night, if the energy level is too low, the camera will take photos/videos without triggering flash.
- No capture: at night, if the energy level is too low, the camera will no longer take photos or videos. It will only take them during the day.
- Programmable camera ID: identifies where and by which camera a photo was taken.
- Programmable password
- Programmable loop recording on memory card: if set to ON, when the memory card is full, the device continues to record photos/videos, deleting the oldest files.
- Padlock slot on camera body
Reliable and efficient
- 2-year warranty
- Weatherproof design (IP66)
- Trigger speed: approx. 0.3 seconds
PIE1060 Wi-Fi camera trap ergonomics
- Weight: 433 g (without batteries) | 525 g (with batteries)
- Dimensions: 143 x 107 x 95 mm
- Power supply: built-in solar panel and/or 4 AA alkaline batteries or 4 AA Ni-rechargeable batteriesMH
- Standby time :
- outdoors: virtually unlimited thanks to built-in solar panel
- indoors: approx. 18 months
- LCD screen: 2" color TFT display, 320 x 240 (RGB)
- Port mini USB 2.0 (file download + point solar panel charging)
- Name of free mobile application (iOS/Android): PIE1060
1 PIE1060 camera trap
1 32 GB memory card
4 AA alkaline batteries (LR06)
1 USB cable
1 wall-mounting system
1 strap nylon
1 user guide