Photographic trap Num'axes PIE1069

The PIE1069 camera trap gives you virtually unlimited autonomy outdoors, thanks to its built-in high-performance solar panel.

Camera trap features PIE1069

• Solar panel with built-in rechargeable lithium battery :
  
  • 3.7 V - 4000 mAh
  • The solar panel battery can be recharged using solar power or the USB cable supplied.
  • The camera uses solar panel power first, before using battery power (if installed).
• Champ from vision: 90
• PIR sensor (motion/heat detector) :
  
  • Angle of detection: 60°
  • Detection distance: approx. 20 m
  • Adjustable detection sensitivity: High | Medium | Low
• Flash Infrared :
  
  • 26 invisible LEDs | Wavelength: 940 nm
  • Range flash: approx. 20 m
  • Flash brightness-dependent automatic infrared activation
  • Infrared power flash adjustable: Auto | Medium | Low | OFF
• Trigger speed ultra rapide: approx. 0.3 seconds
• Capture modes :
  
  • Photo: from 1 to 10 photos per shutter release
  • Video: programmable duration from 5 seconds to 3 minutes
  • Photo + Video: a photo and then a video are taken each time the shutter is released
• Image sensor: 2 Mega Pixels color CMOS
• Photo resolution: 2 MP | 5 MP | 8 MP | 12 MP | 16 MP | 20 MP
• Programmable shutter speed: 1/15 | 1/20 | 1/30
• Photo file format: JPEG
• Video resolution: 360p | 480p | HD 720p | FULL HD 1080p | FULL HD 1296p
• Frames per second: 30 fps
• Audio recording in videos programmable (ON | OFF)
• Video file format : MPEG-4
• PIR detection mode: the camera takes photos and/or videos when the PIR sensor (motion/heat detector) detects activity in the area it covers
• Time Lapse mode: photos and/or videos are taken automatically at regular time intervals. In this mode, the PIR sensor is deactivated (no motion/heat detection).
• User-programmable operating ranges
• Timestamp on photos/videos: date, time, ambient temperature, lunar phase, solar panel energy level, camera nom
• Memory: 128 GB max. micro SD card U1 class 10 minimum (not included). Micro SD cards can be purchased at any time from this site.
• Low-energy night capture: 2 possible settings
  
  • No flash infrared: at night, if the energy level is too low, the camera will take photos/videos without triggering flash.
  • No capture: at night, if the energy level is too low, the camera will no longer take photos or videos. It will only capture during the day.
• Nom Programmable camera ID: identifies where and by which camera a photo was taken.
• Programmable password
• Loop recording on programmable memory card: if this parameter is set to ON, when the memory card is full, the camera continues to record photos/videos, deleting the oldest files.
• Padlock slot on camera body

• 2-year warranty
• Weatherproof design (IP66)
• Trigger speed: approx. 0.3 seconds

• Weight: 404 g (without batteries) | 496 g (with batteries)
• Dimensions: 143 x 107 x 95 mm
• Power supply: integrated solar panel and/or 4 AA alkaline batteries or 4 AA Ni-MH rechargeable batteries (not supplied) - batteries can be purchased at any time from this website.
• Standby time :
  
  • outdoors: virtually unlimited, thanks to built-in solar panel
  • indoors: approx. 12 months
• LCD display: 2" (5 cm) color TFT screen
• Port mini USB 2.0 (file download + point solar panel charging)

1 camera trap PIE1069

1 USB cable

1 wall-mounting system

1 strap for wall mounting nylon

1 user guide

• Install the device at a height of approx. 1.5 m/2 m, facing slightly downwards.
• Install facing north or south. Do not face east or west, as sunrise and sunset can cause the camera to be triggered unexpectedly, resulting in overexposed images.
• To monitor a coulee, point the camera along the coulee rather than perpendicular to it. This allows you to see several animals at a time if they pass in line.
• Avoid placing the camera on a frail tree that may move in strong winds. Try to place the camera on a stable, fixed support.
• Clear away any branches or weeds in front of the camera. In windy conditions or high temperatures, they could cause the camera to shut down unexpectedly.
• Check the condition of the batteries before setting up the camera.
• Make sure you have inserted the memory card correctly.
• Check that the date and time are correct.
• Make sure the selector switch is in the "ON" position before you leave.